Why Polyaspartic Garage Floor Coating Beats Epoxy

Despite being used since the early ‘90s, polyaspartic garage floor coatings are becoming increasingly popular nowadays (and it’s for the right reasons). Epoxy coatings used to dominate the floor coating industry in the past, but that has since changed. The benefits of polyaspartic floor coating seem to have surpassed those of epoxy floor coating. Below, you’ll learn the reasons why polyaspartic garage floor coatings beat epoxy.

Reasons to choose polyaspartic floor coatings over epoxy

Here are the reasons why polyaspartic is considered best floor coatings:
  1. It’s more durable.Compared to epoxy coating (which sits on top of concrete), polyaspartic coating penetrates the floor surface, thus creating a strong bond and more resistance to scratches and dents. What this means is your coating will be more durable, so you won’t have to worry about recoating your floor anytime soon. Also, if your coating becomes damaged, it’s easier to repair it when compared to epoxy coating.
  2. It doesn’t easily fade or peel. Epoxy coatings tend to delaminate a few years after it’s applied. Delamination means that the epoxy coatings fractures into layers. This causes the coating to peel off. Polyaspartic coatings on the other hand form a flake-resistant layer. This means chances of peeling off are extremely rare. Polyaspartic coatings are also UV resistant, meaning you don’t have to worry about leaving your garage doors open and risking fading or yellowing.
  3. It’s fast and easy to install.Installing epoxy coating can take multiple days and about five days to cure. Polyaspartic coatings on the other hand can be installed within a day and they cure within 24 hours. Another benefit of polyaspartic coatings is that they can be installed in any climatic conditions such as winter and summer. Epoxy coatings tend to work properly mostly during summer months and not cold seasons.
  4. Great for allergic people. Allergies can be caused by allergens such as animal fur, dust, detergents, mold etc. These allergens can cause one to cough, sneeze or have watery eyes every time. They mostly reside in soft surfaces such as carpets. When your floor has polyaspartic coating, these allergens won’t be able to penetrate and accumulate inside since the floors are hard. Also, mildew and mold can’t grow on polyaspartic floors.

Polyaspartic floor coating Council Bluffs

Now that you’ve learned why polyaspartic garage floor coating is better, where can you get the service? Are you around Lincoln, NE or Council Bluffs, IA and looking for professional polyaspartic floor coating near you? Contact Garage Floor Rehab for Polyaspartic Floor Coating Council Bluffs, IA or Garage Floor Coating Lincoln, NE today.

What are Polyaspartic Coatings?

If you want to revitalize your garage floor so that it looks good, safe and durable for years to come, then you need to learn about polyaspartic and polyurea floor coatings. The two are quite similar and they’ve gained a lot of popularity over the years compared to epoxy flooring solutions. So what are they? And what are their benefits compared to other flooring solutions?

What is polyaspartic floor coating (or polyurea floor coating?)

Polyurea is a subcategory of polyurethane while polyaspartic is a type of aliphatic polyurea. Polyurea is normally formed as a result of reaction between isocyanates and water or polyetheramines. This forms a urea linkage. Compared to epoxy, polyurea combines resin and a catalyst that causes a curing reaction, which makes the material hard and durable. Polyurea is more flexible than epoxy since it has low to zero VOCs. It also has a 300%+ elongation rate.

It’s mainly used in industrial applications such as interior pipe coating, spray-on bed liners, liquid containment lining, tunnel coatings etc. They cure extremely fast and they take less than 5 minutes to be fully hard. Polyaspartics on the other hand doesn’t cure as quickly as polyurea. Depending on the formulation, polyaspartics have a pot life of between 5 to 120 minutes. To simply understand the two, polyaspartics are in essence polyurea. So In case you see a garage floor coating advert as polyurea, it means it’s a formulation of a polyaspartic coating.

Polyaspartic garage floor coating guide (and benefits)

Now that you’ve learned what polyaspartic and polyurea coatings are, what are the benefits to choosing them? The two major benefits of the two are temperature and time. In this polyurea and polyaspartic floor coating guide, you’ll learn why these two factors matter – and their benefits compared to epoxy coating.

A polyaspartic coating is normally applied in temperatures between -30F and 140F (it depends on the formulation). This means you don’t have to wait for a warmer climate (e.g. summer) to coat your garage floor. They are normally applied in two coats namely; primer/color coat and clear coat. Since they cure fast, the flooring system can be finished in one day, hence you don’t have to wait for 3-4 days like in an epoxy system.

Other benefits of polyurea/polyaspartic floor coatings include:

  • Complete U.V stability.
  • The finish work is Crystal clear and doesn’t blush from moisture inside the concrete.
  • Has high abrasion and high scratch resistance.
  • Highly tolerant to heat.
  • Has high chemical and stain resistance.
  • Doesn’t peel or flake easily.
  • It’s easy to clean.

Best garage floor coating: Council Bluffs, IA and Omaha, NE

If you’re around Council Bluffs, IA or Omaha, NE and need professional, durable and good-looking flooring solutions, contact Polyaspartic Floor Coating Council Bluffs or Polyaspartic Flooring Omaha today.