Polyaspartic vs. Epoxy Coatings for Garage

Choosing the right floor coating for a garage can cause one to scratch their head, especially if you’re quite new to floor coatings. Which one should you go for, a polyaspartic or epoxy flooring system?

In the past, the most known flooring system used to be epoxy. However, over the years, there has been a spike in polyaspartic coating usage for garage floors. Since each of the two flooring types has its own advantages and disadvantages, which one should you go for? In this post, you’ll learn the pros and cons of polyaspartic vs epoxy for garage. Hopefully, you’ll be able to make a decision on the one that suits you by the end of this post.

Polyaspartic vs. Epoxy Garage Floor Coating: What’s the difference?

Understanding the differences between polyaspartic flooring vs epoxy flooring will better help you decide on which one’s right for your garage floor.

Epoxy coating

Epoxies have been around for decades and they’re mainly used in indoor environments such as garage floors, where spills and puddles are likely to occur. They consist of a color base coat, a primer and polyurethane coatings. One can also easily customize epoxy coatings, depending on the preferred style. To apply epoxy coating, you need to do it manually using a paint roller. It takes about a month for it to fully cure but after a week or so, you can park and drive your car.

Pros of epoxy coating

  • They’re affordable.
  • They’re durable.
  • They’re chemical resistant.
  • You have the freedom to customize the floor according to your preference.
  • Has a long pot life.
  • Doesn’t lift up or peel away easily.

Cons of epoxy coating

  • Hard to apply in harsh temperatures such as winter.
  • Takes long time to dry up.
  • Off-gassing can lower the indoor air quality.
  • It gets rigid with time despite hardening.

Polyaspartic coating

Polyaspartic coating was first synthesized in the ‘90s. It is formed as a result of a chemical mixture between a polyaspartic ester and aliphatic polyisocyanate. The mixture forms aliphatic polyurea. Garages with polyaspartic coatings tend to be more flexible than those with epoxy coatings. The coating normally has a clear, glossy finish. It dries up faster and thus applying it is a fast process.

Pros of polyaspartic coating

  • Can be applied in various climates and temperature conditions.
  • They’re durable and they have stain and scratch resistance.
  • Easily customizable.
  • Fast drying time (30 minutes to 1 hour).
  • Doesn’t affect indoor air quality.
  • Its color doesn’t fade easily.

Cons of polyaspartic coating

  • Expensive compared to epoxy.
  • Sensitive to battery acid.
  • Its application may require a professional.
  • Has a short pot life.

Is polyaspartic better than epoxy?

Now that you’ve learned about epoxy vs polyaspartic coating differences, which one is better? It’s not easy to say which one is better since they have their own benefits and drawbacks. However, if you find it hard selecting the right flooring type for you, a specialist can help you out. If you’re around Omaha, NE or Council Bluffs, IA, contact Garage Floor Rehab for top-notch Polyaspartic Flooring Omaha or Polyaspartic Floor Coating Council Bluffs.

Understanding the Pros and Cons of Epoxy Floors

Epoxies have been around for over 100 years and they were initially used in industries and by marines. Nowadays, flooring experts use them to coat floors, but are they worth it? If you’re new to floor coatings, it’s important to understand the pros and cons of epoxy floors before you install them. By the time you’re done reading the below cons and pros of epoxies, you’ll be able to decide whether it’s the right fit for your flooring needs.

Benefits of epoxy flooring

  1. They appear bright and professional. Floors coated with epoxy are normally enticing to see and use since they appear bright and professional. Such floors are also easy to clean and maintain.
  2. They are affordable. Compared to other flooring types such as polyaspartic coatings, epoxy floors are cheaper to install per square footage.
  3. They are durable. When you properly seal and maintain an epoxy floor, expect it to last longer. They offer anti-fatigue benefits and they can easily be rolled-out on cement without glue or mortar.
  4. They offer more floor protection. Epoxy flooring can give your concrete floor an extra layer of protection. This is because it prevents moisture, grease, stains and cracks from interfering with the underlying concrete.
  5. They are customizable. With epoxy flooring, you can choose to decorate your floors as you wish. This is because they come in a variety of colors. They can also be arranged into personalized or traditional designs and patterns.

Disadvantages of epoxy flooring

  1. They need replacing after a few years.Despite epoxy flooring being durable and resistant, you’ll eventually have to replace it. Daily wear and tear can take a toll on your epoxy floors.
  2. They can be very slippery when wet. Oil-covered epoxy floors can be very slippery for those walking on them. They can also be very slippery when the floor is wet. This can pose a great danger to those walking on it. Texturizing your floor can however mitigate these risks.
  3. Preparing an existing floor for epoxy application is tiresome. It is tiresome preparing existing concrete floors for epoxy coating. This is because you have to clean the concrete floor of any oil, grease or solvents prior to applying the epoxy coating.
  4. Doesn’t adhere well in moist environments. If you apply epoxy in a moist environment such as the basement, it may peel off the floors. This is why you ought to prepare, dry and thoroughly clean the concrete floor before the epoxy application.

Garage flooring pros near you (Council Bluffs, IA)

Before deciding on the flooring solution that best suits you, it’s vital you consult a professional contractor to better help you make that decision. Contact Garage Floor Rehab to get help with your Epoxy Garage Floor in Council Bluffs, IA or Omaha, NE & speak to a professional.

Why Polyaspartic Garage Floor Coating Beats Epoxy

Despite being used since the early ‘90s, polyaspartic garage floor coatings are becoming increasingly popular nowadays (and it’s for the right reasons). Epoxy coatings used to dominate the floor coating industry in the past, but that has since changed. The benefits of polyaspartic floor coating seem to have surpassed those of epoxy floor coating. Below, you’ll learn the reasons why polyaspartic garage floor coatings beat epoxy.

Reasons to choose polyaspartic floor coatings over epoxy

Here are the reasons why polyaspartic is considered best floor coatings:
  1. It’s more durable.Compared to epoxy coating (which sits on top of concrete), polyaspartic coating penetrates the floor surface, thus creating a strong bond and more resistance to scratches and dents. What this means is your coating will be more durable, so you won’t have to worry about recoating your floor anytime soon. Also, if your coating becomes damaged, it’s easier to repair it when compared to epoxy coating.
  2. It doesn’t easily fade or peel. Epoxy coatings tend to delaminate a few years after it’s applied. Delamination means that the epoxy coatings fractures into layers. This causes the coating to peel off. Polyaspartic coatings on the other hand form a flake-resistant layer. This means chances of peeling off are extremely rare. Polyaspartic coatings are also UV resistant, meaning you don’t have to worry about leaving your garage doors open and risking fading or yellowing.
  3. It’s fast and easy to install.Installing epoxy coating can take multiple days and about five days to cure. Polyaspartic coatings on the other hand can be installed within a day and they cure within 24 hours. Another benefit of polyaspartic coatings is that they can be installed in any climatic conditions such as winter and summer. Epoxy coatings tend to work properly mostly during summer months and not cold seasons.
  4. Great for allergic people. Allergies can be caused by allergens such as animal fur, dust, detergents, mold etc. These allergens can cause one to cough, sneeze or have watery eyes every time. They mostly reside in soft surfaces such as carpets. When your floor has polyaspartic coating, these allergens won’t be able to penetrate and accumulate inside since the floors are hard. Also, mildew and mold can’t grow on polyaspartic floors.

Polyaspartic floor coating Council Bluffs

Now that you’ve learned why polyaspartic garage floor coating is better, where can you get the service? Are you around Lincoln, NE or Council Bluffs, IA and looking for professional polyaspartic floor coating near you? Contact Garage Floor Rehab for Polyaspartic Floor Coating Council Bluffs, IA or Garage Floor Coating Lincoln, NE today.

What are Polyaspartic Coatings?

If you want to revitalize your garage floor so that it looks good, safe and durable for years to come, then you need to learn about polyaspartic and polyurea floor coatings. The two are quite similar and they’ve gained a lot of popularity over the years compared to epoxy flooring solutions. So what are they? And what are their benefits compared to other flooring solutions?

What is polyaspartic floor coating (or polyurea floor coating?)

Polyurea is a subcategory of polyurethane while polyaspartic is a type of aliphatic polyurea. Polyurea is normally formed as a result of reaction between isocyanates and water or polyetheramines. This forms a urea linkage. Compared to epoxy, polyurea combines resin and a catalyst that causes a curing reaction, which makes the material hard and durable. Polyurea is more flexible than epoxy since it has low to zero VOCs. It also has a 300%+ elongation rate.

It’s mainly used in industrial applications such as interior pipe coating, spray-on bed liners, liquid containment lining, tunnel coatings etc. They cure extremely fast and they take less than 5 minutes to be fully hard. Polyaspartics on the other hand doesn’t cure as quickly as polyurea. Depending on the formulation, polyaspartics have a pot life of between 5 to 120 minutes. To simply understand the two, polyaspartics are in essence polyurea. So In case you see a garage floor coating advert as polyurea, it means it’s a formulation of a polyaspartic coating.

Polyaspartic garage floor coating guide (and benefits)

Now that you’ve learned what polyaspartic and polyurea coatings are, what are the benefits to choosing them? The two major benefits of the two are temperature and time. In this polyurea and polyaspartic floor coating guide, you’ll learn why these two factors matter – and their benefits compared to epoxy coating.

A polyaspartic coating is normally applied in temperatures between -30F and 140F (it depends on the formulation). This means you don’t have to wait for a warmer climate (e.g. summer) to coat your garage floor. They are normally applied in two coats namely; primer/color coat and clear coat. Since they cure fast, the flooring system can be finished in one day, hence you don’t have to wait for 3-4 days like in an epoxy system.

Other benefits of polyurea/polyaspartic floor coatings include:

  • Complete U.V stability.
  • The finish work is Crystal clear and doesn’t blush from moisture inside the concrete.
  • Has high abrasion and high scratch resistance.
  • Highly tolerant to heat.
  • Has high chemical and stain resistance.
  • Doesn’t peel or flake easily.
  • It’s easy to clean.

Best garage floor coating: Council Bluffs, IA and Omaha, NE

If you’re around Council Bluffs, IA or Omaha, NE and need professional, durable and good-looking flooring solutions, contact Polyaspartic Floor Coating Council Bluffs or Polyaspartic Flooring Omaha today.